Wall-Mounted Helmet Holder | 3D Printed Helmet & Glove Hook - image 1

Wall-Mounted Helmet Holder | 3D Printed Helmet & Glove Hook - image 2

Wall-Mounted Helmet Holder | 3D Printed Helmet & Glove Hook - image 3

Wall-Mounted Helmet Holder | 3D Printed Helmet & Glove Hook - image 5

Wall-Mounted Helmet Holder | 3D Printed Helmet & Glove Hook - image 6

Wall-Mounted Helmet Holder | 3D Printed Helmet & Glove Hook - image 7

Wall-Mounted Helmet Holder | 3D Printed Helmet & Glove Hook - image 8

Wall-Mounted Helmet Holder | 3D Printed Helmet & Glove Hook - image 9

Wall-Mounted Helmet Holder | 3D Printed Helmet & Glove Hook - image 10

Wall-Mounted Helmet Holder | 3D Printed Helmet & Glove Hook - image 11

Adiva Garage

Wall-Mounted Helmet Holder | 3D Printed Helmet & Glove Hook

Name: Wall-Mounted Helmet Holder | 3D Printed Helmet & Glove Hook
Brand: Adiva Garage
SKU: 718
Price: 249 INR
Availability: InStock
Rating: 5.00 (1 reviews)

5.0 out of 5 · 1 review

₹249 Inclusive of all taxes

Order on WhatsApp

Free shippingover ₹399
Cash ondelivery
Made to orderin Pune
Damaged?we replace it

Description

Wall-mounted helmet holder, 3D printed to order in Pune. Cradles the helmet by the rim, hooks your gloves underneath, and screws flat to any wall. Made in the colour you pick.

Specifications

Material: PETG, 100% infill through the arm
Weight: 25 g
Tested load: 8 kg, static, on the bench
Dimensions: 9.5 × 7.1 × 2.0 cm
Fixings: 2 screws, wall plugs included
Wall types: Brick, concrete, drywall, ply, metal shutter
Heat tolerance: Holds its shape through an Indian summer garage
Finish: Two-tone, matte, embossed AD
Made in: Pune, printed to order

Shipping & returns

Printed to order in Pune and shipped across India. Order now and it should reach you around 17–21 Oct. Free shipping over ₹399, and cash on delivery is available.

Arrived damaged? Send us a photo on WhatsApp and we’ll replace it. Shipping & Returns policy

Share: Need help?

25 gof PETG

8 kgbench-tested

4 minto install

10colours

See it in action

Mark it, drill itTwo holes and a driver. That is the whole install.

Snug, not gorillaThe second screw is what stops it rotating.

The lid goes onWeight on the shell, never on the strap.

Two helmets, one wallPillion lid gets its own. Stack them vertically.

Then you forget it existsWhich is the whole idea.

Helmet going onto the wall-mounted cradle

Why you need this

Don’t hide your helmet.

Right now it lives on the seat, the floor, or hanging off a mirror by the strap. All three are worse than a wall.

Takes the weight on the shell. The curved cradle spreads the load across the rim instead of stretching two centimetres of strap.
Hook underneath for the rest. Gloves, keys, a disc lock — the things you put down and then spend ten minutes finding.
Flat back plate, two screws. Two points of contact mean it cannot swing out of true under load.

A plain steel hook next to the curved Adiva cradle

Protects the shape

A hook is a hook. This is a cradle.

Hang a helmet off a bent piece of steel and all the weight lands on one narrow point. Come back in a month and the padding has a dent in it that never quite goes.

Smooth rounded cradle. Nothing sharp to bite into the shell.
Spreads contact over the rim. The liner keeps its shape.
Fits every helmet class. Full-face, modular, flip-up, open-face, half.

Four minutes, start to finish

Drill. Screw. Hang. Done.

01Pick the wallEye level, arm’s reach from where the bike parks.
02Two holesMark through the back plate, 6 mm bit, tap the plugs in.
03Two screwsSnug, not gorilla. The second one stops it rotating.
04Hang itHelmet on the cradle, gloves on the hook. Walk away.

Ten colours

Match the bike. Or don’t.

Also in Paddock White, Hi-Vis Yellow, Deep Purple, Black + Green and Black + Blue — pick yours above. Every one is two-tone with the black inlay.

Customer Reviews

1 review for Wall-Mounted Helmet Holder | 3D Printed Helmet & Glove Hook

Rated 5 out of 5

ARJUN WAGHMARE – September 27, 2026

nice helmet holder and have good looking cradle for helmet scratch free safty

Add a review

FAQs

Will it hold my helmet?

A full-face lid is 1.4–1.8 kg. This is bench-tested at 8 kg — about five helmets. The failure mode we design against is creep over years, not a single load.

It's 3D printed. Doesn't that mean weak?

It means printed, which is a process, not a strength rating. PETG at full infill through the arm, with the layer lines running across the load rather than along it. The plastic isn't the limit — your wall plug is.

Will it soften in a closed garage?

No. PLA — what most cheap prints use — starts going soft around 55 °C, which a shut garage in May reaches easily. PETG holds well past that. That is the entire reason we don't use PLA.

What about drywall or a metal shutter?

Fine on both. Drywall wants toggle anchors rather than the plugs in the box — say so at checkout and we'll drop a set in. On a shutter, use two self-tappers.

Does it fit an open-face or a modular?

Yes. The cradle is sized on the rim, and every helmet class shares roughly the same rim. Full-face, flip-up, modular, open-face, and a bicycle helmet at a pinch.

Can I hang a jacket on it too?

You can, and people do — that's what the 8 kg headroom buys you. The lower hook is meant for gloves, keys or a disc lock, but a wet jacket over the arm won't trouble it.

What if it breaks?

Send us a photo. If it failed under normal use we print you a new one and post it. We'd rather know than argue.

What about delivery?

Free shipping on orders over ₹399, cash on delivery available, and we ship across India. Every piece is printed after you order, so allow a little time before dispatch — message us on WhatsApp if you need it by a date.

Can I get a colour that is not listed?

Usually yes. Message us on WhatsApp before ordering and we will confirm it.

Something arrived damaged.

Message us on WhatsApp with a photo and we will replace it. Full policy on the Shipping & Returns page.